Contact
PRODUCTSSOLUTIONSCOMPANYCUSTOMER SERVICEDOWNLOADS
Item no. 210-345

Labels; for laser printer; permanent adhesive; 9.5 x 25 mm; white

1 of 1
200_020000070003a5d8000100b6_DE
Color:
120_020000070003a5d8000100b6_DE
Item no. 210-345
Labels
Marking surface:   9.5 x 25 mm
Configure
Item no. 210-345
Labels
Marking surface:   9.5 x 25 mm
Configure
Details
Downloads
Technical data
Physical data
Mechanical data
Material data
Commercial data
Product classification
Environmental Product Compliance
Other customers also purchased
1 - 4 of 12
: 249-116
Screwless end stop; 6 mm wide; for DIN-rail 35 x 15 and 35 x 7.5; gray
: 249-119
Group marker carrier; gray
: 249-117
Screwless end stop; 10 mm wide; for DIN-rail 35 x 15 and 35 x 7.5; gray
: 2002-2692
End and intermediate plate; 1 mm thick; orange
: 2010-1204
2-conductor through terminal block; 10 mm²; for Ex e II and Ex i applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 10,00 mm²; blue
: 2010-1207
2-conductor ground terminal block; 10 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 10,00 mm²; green-yellow
: 206-1204
Variocrimp 4 crimping tool; for insulated and uninsulated ferrules; Crimping range: 0.25 to 4.0 mm²
: 210-804
Type labels; 99 x 44 mm; silver-colored
: 221-2502
Mounting carrier with strain relief; 2-way; for inline splicing connector with lever; for screw mounting; gray
: 222-505
Strain relief plate; for mounting carrier; 221 or 222 Series, can be snapped
: 249-120
Group marker carrier; white
: 261-331
4-conductor terminal block; without push-buttons; with fixing flange; 1-pole; for screw or similar mounting types; Fixing hole 3.2 mm Ø; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray