[{"term":"Libraries_BA","id":0,"type":"QUICKLINKS"},{"term":"221","id":1,"type":"QUICKLINKS"},{"term":"сграда","id":2,"type":"QUICKLINKS"},{"term":"Забележки за приложението","id":3,"type":"QUICKLINKS"},{"term":"WAGO-I/O-PRO","id":4,"type":"QUICKLINKS"}]
{
"@context" : "http://schema.org/",
"@type" : "Product",
"name" : "DALI Multi-Master",
"description" : "<p>The DALI Multi-Master (753-647) is certified according to the IEC 62386 DALI-2 standard. This manufacturer-independent protocol ensures the interoperability of DALI devices in lighting applications.</p><p>Just 12 mm wide, this module is used as a DALI interface in combination with WAGO's 750 Series Controllers and Modules (e.g., BACnet, KNX, EnOcean, LON®, Modbus®).</p><p>Each DALI Multi-Master supports 64 addresses for electronic control gears (ECGs) and 64 addresses for control devices (DALI multi sensors: Connection of max. 16 sensors recommended due to the cyclic transmission characteristics). Each DALI ECG can be assigned to 16 groups and 16 scenes. The DALI Multi-Master also offers 16 additional virtual groups on the DALI bus. Using the WAGO I/O System 750, DALI controllers can be seamlessly integrated into other building systems. Several DALI masters can connect to a single fieldbus node. The maximum number of modules that may be connected to a controller depends on the memory required by the application. The WAGO-I/O-PRO (CODESYS V2.3) or <b><i>e!</i></b><i>COCKPIT</i> (based on CODESYS V3) programming software is used as the programming software for the fieldbus nodes. WAGO provides a comprehensive IEC-61131-3 library of function blocks, simplifying the creation of complex lighting applications.</p><p>Alternatively, an “Easy Mode” allows lighting functions to be readily controlled without any complicated PLC programming. The comprehensive and easy-to-use WAGO DALI Configurator is available for commissioning and maintenance – it can either run as a stand-alone application or be called from the WAGO-I/O-CHECK (CODESYS V2.3) or <b><i>e!</i></b><i>COCKPIT</i> Software (based on CODESYS V3).</p><p>Two options are available to power to the DALI Multi-Master:</p><p>1. Via 753-620 DALI Multi-Master DC/DC Converter for powering a single module.</p><p>2. Via 787-2857 Power Supply for powering several 753-647 DALI Multi-Master Modules.</p>",
"mpn" : "753-647",
"sku" : "753-647",
"brand" : {
"@type":"Brand",
"name":"WAGO"
},
"manufacturer" : {
"@type":"Organization",
"name":"WAGO Kontakttechnik GmbH & Co. KG"
},
"image" : "https://www.wago.com/medias/200-0200001500021005000100b6-DE.jpg?context=bWFzdGVyfGltYWdlc3wzMDQ2fGltYWdlL2pwZWd8YUdSaEwyaGlNUzh4TkRZNE9UYzRNVGMzTmpReE5DOHlNREJmTURJd01EQXdNVFV3TURBeU1UQXdOVEF3TURFd01HSTJYMFJGTG1wd1p3fDg3NGVlOTMwM2M4MTliNzI3ZThjODZiM2I3ZDI3MTkzYzhmYjk1ODQ5MzZmYjYyYmU0NmUyZmI0ZDdjNWM1Yjk",
"gtin13" : "4050821475712",
"category" : "I/O Systems",
"url" : "https://www.wago.com/bg/io-systems/dali-multi-master/p/753-647"
}
