Short description:
This configurable signal conditioner converts, amplifies, filters and electrically isolates standard analog signals.
Features:
Short description:
This current signal conditioner measures AC/DC currents up to 100 A, while converting the measured current into an analog standard signal at the output.
Features:
Short description:
This temperature signal conditioner records Pt100, Pt200, Pt500, and Pt1000 sensors, as well as resistors up to 4.5 kOhm, converting the temperature signal into a standard analog signal at the output.
Features:
Short description:
This signal splitter converts, amplifies, filters and electrically isolates standard analog signals.
Features:
Short description:
This bipolar signal conditioner converts standard unipolar/bipolar signals, as well as amplifies, filters and electrically isolates the bipolar standard analog signals.
Features:
Short description:
This configurable signal conditioner converts, amplifies, filters and electrically isolates standard analog signals.
Features:
Short description:
This pre-configured signal conditioner converts, amplifies, filters and electrically isolates analog standard signals.
Features:
Short description:
This current signal conditioner measures both 0–1 A and 0–5 A AC/DC currents, converting the input signal to an standard analog signal at the output.Features:
Short description:
This isolation amplifier provides the power required for 2- or 3-wire field transmitters and electrically isolates analog signals.
Features:
This signal conditioner converts standard unipolar/bipolar signals, as well as amplifies, filters and electrically isolates standard analog signals.
Features:
Short description:
This pre-configured signal conditioner converts, amplifies, filters and electrically isolates analog standard signals.
Features:
Short description:
This temperature signal conditioner records signals from thermocouples (type J, K) and converts the temperature signal into a standard analog signal at the output.
Features:
Short description:
This threshold value switch for analog signals monitors standard analog signals and reports signals exceeding a preset threshold.
Features:
Short description:
This potentiometer signal conditioner records resistance signals (e.g., from potentiometers) and converts them into a standard analog signal. The device is supplied with 24 VDC (nominal voltage). It is set via DIP switch or push/slide switch.
Features:
Short description:
This frequency signal conditioner collects 0.1–120 kHz signals from NAMUR, NPN or PNP sensors and converts them into a standard analog signal.
Features:
Short description:
This pre-configured signal conditioner converts, amplifies, filters and electrically isolates analog standard signals.
Features:
Short description:
This pre-configured signal conditioner converts, amplifies, filters and electrically isolates analog standard signals.
Features:
Short description:
This signal splitter converts, amplifies, filters and electrically isolates standard analog signals. In addition, the input signal is split into two separate outputs.
Features:
Short description:
This passive isolator (1‐channel) electrically isolates and filters 0(4)–20 mA standard analog signals, while drawing power for signal transmission from the input circuit. The connected sensor supplies the passive isolator with the required power to energize the connected load.
Features:
Short description:
This voltage signal conditioner measures AC/DC voltages up to 300 V, converting the input signal into a standard analog signal at the output.
Features: