Mini-WSB Item no. 248-578/000-017
Mini-WSB marking card; as card; MARKED; PE (100x); not stretchable; Horizontal marking; snap-on type; light green
Color: 
Picture differs from the item.
Details
Downloads
Knowledge/FAQ
Technical data
Physical data
Mechanical data
Material data
Commercial data
Product classification
Environmental Product Compliance
Other customers also purchased
1 - 4 of 20
: 247-507/000-006
Mini-WSB marking card; as card; MARKED; - (100x); not stretchable; Horizontal marking; snap-on type; blue: 247-509/000-005
Mini-WSB marking card; as card; MARKED; + (100x); not stretchable; Horizontal marking; snap-on type; red
: 2009-145
Mini-WSB Inline; for Smart Printer; 1700 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type; white
: 2020-1301
2-conductor/1-pin carrier terminal block; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 1,00 mm²; gray: 247-552/000-017
Mini-WSB marking card; as card; MARKED; Ground (100x); not stretchable; Horizontal marking; snap-on type; light green
: 248-501
Mini-WSB marking card; as card; not stretchable; plain; snap-on type; white: 248-501/000-005
Mini-WSB marking card; as card; not stretchable; plain; snap-on type; red: 248-501/000-006
Mini-WSB marking card; as card; not stretchable; plain; snap-on type; blue
: 249-117
Screwless end stop; 10 mm wide; for DIN-rail 35 x 15 and 35 x 7.5; gray
: 249-119
Group marker carrier; gray
: 258-5000
Thermal transfer printer; Smart Printer; for complete control cabinet marking; 300 dpi; With marking material
: 258-5008
Roller; for Smart Printer; for Mini-WSB Inline WAGO (2009-145); 1 grinding device
: 280-317
End and intermediate plate; 2.5 mm thick; orange
: 280-402
Jumper; insulated; gray
: 280-580
4-conductor sensor terminal block; with colored conductor entries; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray
: 280-621
4-conductor through terminal block; 2.5 mm²; lateral marker slots; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 2,50 mm²; gray
: 750-498
8-channel analog input; Thermocouple; Adjustable
: 751-9301
Compact Controller 100; 8DI 4DO 2AI 2AO 2NI1K/PT1K 1RS485; 2 x ETHERNET; SD
: 790-108
Shield clamping saddle; 11 mm wide; diameter of compatible conductor; 3 ... 8 mm
: 790-301
Busbar carrier; for busbars Cu 10 mm x 3 mm; single side, angled; for DIN 35 rail; silver-colored