Contact
PRODUCTSSOLUTIONSTrendsCOMPANYCUSTOMER SERVICEDOWNLOADSCatalogs
WINSTA® MAXI Item no. 831-3105/1019-004

Socket; with strain relief housing; 5-pole; Cod. A; 6,00 mm²; black

1 of 3
200_020000030002b6c7000100b6_DE200_0200002500001111000100b6_DE
Color:
120_020000030002b6c7000100b6_DE120_0200002500001111000100b6_DE
Item no. 831-3105/1019-004
Socket; with strain relief housing; 5-pole; Cod. A; 6,00 mm²; black
Color:   black
Item no. 831-3105/1019-004
Socket; with strain relief housing; 5-pole; Cod. A; 6,00 mm²; black
Color:   black
Details
Description
Downloads
Approvals
Related products
Knowledge/FAQ
Electrical data
Connection data
Physical data
Mechanical data
Plug-in connection
Material data
Environmental requirements
Commercial data
Product classification
Environmental Product Compliance
Other customers also purchased
1 - 4 of 20
: 831-3205/1020-004
Plug; with strain relief housing; 5-pole; Cod. A; 6,00 mm²; black
: 831-3205/1020-050
Plug; with strain relief housing; 5-pole; Cod. A; 6,00 mm²; white
: 770-123
Socket; with strain relief housing; 3-pole; Cod. A; 4,00 mm²; white
: 770-640
Three-phase to single-phase distribution connector; with phase selection; 5-pole/3-pole; Cod. A; 1 input; 5 outputs; black
: 771-9995/017-401
pre-assembled interconnecting cable; Eca; Socket/plug; 5-pole; Cod. A; H05Z1Z1-F 5G 2.5 mm²; 4 m; 2,50 mm²; black
: 771-9995/117-101
pre-assembled connecting cable; Eca; Socket/open-ended; 5-pole; Cod. A; H05Z1Z1-F 5G 2.5 mm²; 1 m; 2,50 mm²; black
: 2004-1407
4-conductor ground terminal block; 4 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 4,00 mm²; green-yellow
: 2006-1301
3-conductor through terminal block; 6 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 6,00 mm²; gray
: 2010-1304
3-conductor through terminal block; 10 mm²; for Ex e II and Ex i applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 10,00 mm²; blue
: 2016-1301
3-conductor through terminal block; 16 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 16,00 mm²; gray
: 2016-1304
3-conductor through terminal block; 16 mm²; for Ex e II and Ex i applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 16,00 mm²; blue
: 2016-1307
3-conductor ground terminal block; 16 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 16,00 mm²; green-yellow
: 2020-181
End module for 1-conductor female connector; Push-in CAGE CLAMP®; 1.5 mm²; Pin spacing 3.5 mm; 1-pole; 1,50 mm²; gray
: 2020-5311
3-conductor sensor terminal block; for PNP (positive) switching sensors; 1 mm²; Push-in CAGE CLAMP®; 1,00 mm²; gray
: 2020-5391
End and intermediate plate; 1 mm thick; for 3-conductor terminal blocks; gray
: 211-501/000-002
Shrink tube; for Smart Printer; Unshrunk diameter: 3.2 mm; yellow
: 221-413
Splicing connector with levers; for all conductor types; max. 4 mm²; 3-conductor; transparent housing; Surrounding air temperature: max 85°C (T85); 4,00 mm²; transparent
: 221-500
Mounting carrier; 221 Series - 4 mm²; for DIN-35 rail mounting/screw mounting; orange
: 249-116
Screwless end stop; 6 mm wide; for DIN-rail 35 x 15 and 35 x 7.5; gray
: 256-100
End plate; snap-fit type; 1 mm thick; gray