Jumper (2000-408/000-006) | WAGO SG

Details

Downloads

Approvals

Knowledge/FAQ

Other customers also purchased

: 2000-408/000-005

Jumper; 8-way; insulated; red

3-conductor sensor terminal block; with colored conductor entries; 1 mm²; Push-in CAGE CLAMP®; 1,00 mm²; gray

: 2000-404/000-006

Jumper; 4-way; insulated; blue

End and intermediate plate; 1 mm thick; for 3-conductor terminal blocks; gray

End and intermediate plate; 0.8 mm thick; gray

Screwless end stop; 6 mm wide; for DIN-rail 35 x 15 and 35 x 7.5; gray

: 2000-404/000-005

Jumper; 4-way; insulated; red

: 2000-406/000-005

Jumper; 6-way; insulated; red

Jumper; from 1 to 3; insulated; light gray

2-conductor through terminal block; 2.5 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 2,50 mm²; gray

Empty component plug housing; 5.2 mm wide; 2-pole; Type 1; gray

2-conductor through terminal block; 10 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 10,00 mm²; gray

End and intermediate plate; 1 mm thick; gray

Stand off; for carrier rail; suitalble for M5 size screw; with special perforations

Busbar carrier; for busbars Cu 10 mm x 3 mm; single side, straight; for DIN 35 rail; silver-colored

Operating tool; Blade: 2.5 x 0.4 mm; with a partially insulated shaft; angled; short

Shrink tube; for Smart Printer; Unshrunk diameter: 3.2 mm; white

: 211-501/000-002

Shrink tube; for Smart Printer; Unshrunk diameter: 3.2 mm; yellow

Shrink tube; for Smart Printer; Unshrunk diameter: 4.8 mm; white

: 211-502/000-002

Shrink tube; for Smart Printer; Unshrunk diameter: 4.8 mm; yellow