Operating pliers; for 281, 282, 283, 284 Series (side-entry wiring)
1 of 1
Picture differs from the item.
Details
Downloads
Material data
Commercial data
Product classification
Environmental Product Compliance
Other customers also purchased
1 - 4 of 13
Item no.: 2004-1201
2-conductor through terminal block; 4 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 4,00 mm²; gray
Item no.: 206-841
Disconnection tool; for 744 Series; multicoloured
Item no.: 209-188
Mounting foot; can be assembled on terminal blocks with fixing flange; gray
Item no.: 210-720
Operating tool; Blade: 3.5 x 0.5 mm; with a partially insulated shaft; multicoloured
Item no.: 210-722
Operating tool set with partially insulated shaft; Type 1, blade (2.5 x 0.4) mm; Type 2, blade (3.5 x 0.5) mm; Type 3, blade (5.5 x 0.8) mm
Item no.: 221-2411
Inline splicing connector with levers; for all conductor types; max. 4 mm²; 2-conductor; transparent housing; Transparent cover; Surrounding air temperature: max 85°C (T85); 4,00 mm²; transparent
Item no.: 289-555
Interface module; with solder pin; Female connector; 9-pole; Mating connector with solder connection; Vertical mounting; PCB terminal blocks, double-row; in mounting carrier; 2,50 mm²Item no.: 289-557
Interface module; with solder pin; Female connector; 25-pole; Mating connector with solder connection; Vertical mounting; PCB terminal blocks, double-row; in mounting carrier; 2,50 mm²
Item no.: 750-8100
Controller PFC100; 2 x ETHERNET; ECO
Item no.: 770-502/041-000
Strain relief housing; 2-pole; with locking clip; for 1 cable; 7.0 … 10.5 mm; 35 mm; black
Item no.: 787-2861/100-000
Electronic circuit breaker; 1-channel; 24 VDC input voltage; 1 A; Signal contact
Item no.: 831-3206/007-000
1-conductor male connector; Push-in CAGE CLAMP®; 10 mm²; Pin spacing 7.62 mm; 6-pole; 100% protected against mismating; DIN-35 rail mounting; 10,00 mm²; light gray
Item no.: 887-927
Splicing Connector Set; L-BOXX® 102; 221 Series