Mini-WSB Item no. 247-506/000-006
Mini-WSB marking card; as card; MARKED; 0V (100x); not stretchable; Horizontal marking; snap-on type; blue
Color: 
Picture differs from the item.
Details
Downloads
Knowledge/FAQ
Buy now
Technical data
Physical data
Mechanical data
Material data
Commercial data
Product classification
Environmental Product Compliance
Other customers also purchased
: 2002-404
TOPJOB®S jumper; for 2002 series; insulated; 4-way; light-gray
: 2003-7646
Multilevel installation terminal block; with operating slots; 2.5 mm²; N/L/PE; Push-in CAGE CLAMP®; 2,50 mm²; gray
: 2003-7692
End and intermediate plate; 0.8 mm thick; orange
: 209-130
Operating tool; made of insulating material; 1-way; for 264 Series (1-/2-way), 280, 281 Series (up to 3-way); natural
: 216-210
Ferrule; Sleeve for 16 mm² / AWG 6; insulated; electro-tin plated; electrolytic copper; gastight crimped; acc. to DIN 46228, Part 4/09.90; blue
: 243-131
Solder pin for 243 Series MICRO PUSH WIRE® PCB connector
: 247-508/000-005
Mini-WSB marking card; as card; MARKED; 24 V (100x); not stretchable; Horizontal marking; snap-on type; red: 247-552/000-017
Mini-WSB marking card; as card; MARKED; Ground (100x); not stretchable; Horizontal marking; snap-on type; light green
: 248-503
Mini-WSB marking card; as card; MARKED; 11 ... 20 (10x); not stretchable; Horizontal marking; snap-on type; white: 248-506
Mini-WSB marking card; as card; MARKED; 41 ... 50 (10x); not stretchable; Horizontal marking; snap-on type; white
: 264-301
2-conductor end terminal block; without push-buttons; with fixing flange; 1-pole; for screw or similar mounting types; Fixing hole 3.2 mm Ø; 2.5 mm²; CAGE CLAMP®; gray
: 280-837
4-conductor ground terminal block; 2.5 mm²; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 2,50 mm²; green-yellow
: 289-175
Interface module; RJ-45; PCB terminal blocks, double-row; Cat. 5; in mounting carrier; with shield connection; with shield clamping saddle; 1,50 mm²
: 721-108/027-000
1-conductor female connector; CAGE CLAMP®; 2.5 mm²; Pin spacing 5 mm; 8-pole; 100% protected against mismating; clamping collar; 2,50 mm²; light gray
: 750-405
2-channel digital input; 230 VAC
: 781-454
Staggered jumper; from 1 to 4; insulated; gray
: 862-1503
4-conductor chassis-mount terminal strip; without ground contact; PE-N-L1; 3-pole; for 3 mm ø screw and nut; 4 mm²; black
: 890-113
Plug; with strain relief housing; 3-pole; 1,50 mm²; black