Contact
PRODUCTSINDUSTRIESSOLUTIONSWHERE TO BUYWAGOSUPPORTDOWNLOADSCareers
WINSTA® MIDI Item no. 770-625

Mounting plate; 5-pole; for distribution connectors; Plastic; black

1 of 4
200_0200000200038dd3000100b6_DE200_020000320001ac5d000100b6_DE200_020000320001ad71000100b6_DE
Color:
120_0200000200038dd3000100b6_DE120_020000320001ac5d000100b6_DE120_020000320001ad71000100b6_DE
Item no. 770-625
Mounting plate; 5-pole; for distribution connectors; Plastic; black
Item no. 770-625
Mounting plate; 5-pole; for distribution connectors; Plastic; black
Details
Description
Downloads
Related products
Knowledge/FAQ
Buy now
Connection data
Mechanical data
Material data
Environmental requirements
Commercial data
Product classification
Environmental Product Compliance
Other customers also purchased
1 - 4 of 20
: 770-609
3-way distribution connector; 5-pole; Cod. A; 1 input; 3 outputs; black
: 857-624
Solid-state timer relay module; Nominal input voltage: 24 VDC; Output voltage range: 0 … 24 VDC; Limiting continuous current: 2 A; 2-wire connection; Multifunction/Multitime; Yellow status indicator; Module width: 6 mm
: 2022-1201
1-conductor/1-pin carrier terminal block; 2.5 mm²; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 2,50 mm²; gray
: 210-112
Steel carrier rail; 35 x 7.5 mm; 1 mm thick; 2 m long; slotted; according to EN 60715; "Hole width 25 mm; silver-colored
: 210-648
Operating tool; Blade: 2.5 x 0.4 mm; with a partially insulated shaft; angled; short
: 210-658
Operating tool; Blade: 3.5 x 0.5 mm; with a partially insulated shaft; angled; short; multicoloured
: 210-719
Operating tool; Blade: 2.5 x 0.4 mm; with a partially insulated shaft
: 279-325
End and intermediate plate; 2 mm thick; gray
: 279-402
Jumper; insulated; gray
: 279-831
4-conductor through terminal block; 1.5 mm²; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 1,50 mm²; gray
: 279-901
2-conductor through terminal block; 1.5 mm²; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 1,50 mm²; gray
: 280-314
End and intermediate plate; 2.5 mm thick; gray
: 870-501
Double-deck terminal block; Through/through terminal block; L/L; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray
: 870-519
End and intermediate plate; 2.0 mm thick; Orange
: 770-354
Mounting plate; 2- to 5-pole; for distribution connectors; silver-colored
: 770-607
3-way distribution connector; 3-pole; Cod. A; 1 input; 3 outputs; black
: 770-611
Three-phase to single-phase distribution connector; with phase selection; 5-pole/3-pole; Cod. A; 1 input; 2 outputs; with cable connection on the input side; black
: 770-7105
Linect® T-connector; 5-pole; Cod. I; 1 input; 2 outputs; blue
: 788-113
Jumper; for jumper slot; 2-way; insulated; light gray
: 788-115
Jumper; for jumper slot; 4-way; insulated; light gray